White Floor Cabinet With Glass Doors - Step-by-step instructions for measuring your face frame cabinets for new cabinet doors. Most cabinet businesses want you to provide them the true door dimensions rather than the rough openings. Rough openings will be the actual measurements of the rectangular holes in your cabinets that you want to pay with cabinet doors. You will need to take these measurements and convert them to door dimensions before you order. Check your cabinet openings to see if they are square. This is easily accomplished by measuring diagonally from corner to corner both the ways.
If they are not, then you will want to measure the width at the top and bottom and then take the larger of the two. Same thing goes for the elevation, measure height on the left and right sides and take the larger of the two. At this point you have the tough opening measurements. To make it easier to fit your new doorways to your current openings, you may want to produce a sketch of your cabinets and number them on paper. This is going to make mounting the new doors much easier, especially in the event that you've got several doors that are near the identical size. Now that you've got the rough opening measurements, what do you do with them?
You finally have to make a decision. How many overlays would you want to have in your face frame cabinets? Bear in mind how wide are the stiles involving openings? If two doorways are side by side and hinge on hinge, they'll both need clearance to swing open without hitting the other door, even if that door is open as well. The quantity of clearance is primarily a function of which hinge you're using. Check with your own hinge manufacturer to discover how much you want. Most hinges will require anywhere from zero clearance till a quarter of an inch.
Examine the underside for any decorative moldings that may hit the bottom of your doors and adjust accordingly. Most face frame overlay doors possess an overlay from a quarter of an inch to as much as three-quarters of the inch. Rarely, you may have overlays outside this choice, but they do happen and are usually for just a few doors on an old cabinet. An overlay of six-pack inch is possibly the most common, and also the one we'll use for our examples.
For single openings, this can be an opening in your cabinets that will have a door covering the whole opening, choose the width and height of the opening and then add one inch to the width and height and that is going to provide you a half inch overlay on all four sides. For instance, if the rough opening is sixteen inches wide and half dozen inches tall, you will require a door 5 inches broad and thirty-three inches tall.