Afina Triple Door Medicine Cabinet - Step-by-step directions for measuring your face frame cabinets for new cupboard doors. Most cupboard businesses would like you to provide them the actual door dimensions in contrast to the rough openings. Rough openings are the actual measurements of these rectangular holes in your cabinets that you would like to cover with cupboard doors. You'll need to take these measurements and convert them into door dimensions before you purchase. Assess your cupboard openings to see whether they are square.
If they are not, then you will want to measure the diameter at the top and bottom and then take the bigger of the two. Same thing goes for the height, measure height on the left and side and take the bigger of the two. At this point you have the tough opening measurements. So to make it easier to fit your new doors to your existing openings, you might want to make a sketch of your cabinets and number them on paper. This is going to make mounting the new doors much easier, particularly if you have many doors which are near the same size. Now that you have the rough opening measurements, what do you do together?
You now need to make a determination. How many overlays would you wish to have in your face frame cabinets? Keep in mind how broad are the stiles involving openings? Stiles is the vertical strips covering the edges of the cabinet box. If two doors are side by side and hinge to hinge, they'll both need clearance to swing open without hitting another door, even if this door is open as well. The quantity of clearance is primarily a part of which hinge you're using. Check with your hinge manufacturer to discover how much you really need. Most hinges will require anywhere from zero clearance up to a quarter of a inch.
Examine the bottom for any decorative moldings that might hit the base of your doors and fix accordingly. Most face frame overlay doors possess an overlay in the quarter of an inch to as much as three-quarters of an inch. Rarely, you might have overlays outside this choice, however they do happen and are often for just a couple of doors on an old cupboard. An overlay of one-half inch is probably the most common, and also the one we'll use for our examples.
For single openings, this can be a opening in your cabinets which will have a door covering the entire opening, take the width and height of the opening and then add one inch to the width and height and that is going to provide you a half inch overlay on all four sides. As an instance, if the rough opening is sixteen inches broad and thirty-two inches tall, you'll require a door seventeen inches wide and one-hundred inches tall.