Updating Cabinet Doors With Glass - Step by step directions for measuring your face frame cabinets for new cabinet doors. Most cabinet companies would like you to give them the actual door dimensions rather than the rough openings. Rough openings are the actual measurements of these rectangular holes on your cabinets that you would like to cover with cabinet doors. You'll need to take these measurements and convert them to doorway dimensions before you order. Assess your cabinet openings to see whether they're square.
If they aren't, then you may wish to gauge the width at the top and bottom and then take the bigger of both. Same thing goes for the height, measure height on the left and right sides and take the bigger of both. You now have the tough opening measurements. To make it easier to fit your new doorways to your current openings, you may want to make a sketch of your cabinets and number them on paper. This will make mounting the new doors much easier, especially if you have several doors that are near the same size. Now that you have the rough opening measurements, what can you do together?
You finally need to make a determination. How many overlays would you wish to have on your face frame cabinets? Keep in mind how broad are the stiles involving openings? If two doorways are side by side and hinge to hinge, they'll both need clearance to swing open without hitting the other doorway, even if this door is open as well. The amount of clearance is primarily a function of which hinge you are using. Check with your own hinge maker to discover how much you really need. Most hinges will require anywhere from zero clearance till a quarter of an inch.
You'll also need to realize how much clearance there is between the surface of the opening along with your countertop or drawer fronts. Check the underside for any decorative moldings that may hit the bottom of your doors and adjust accordingly. Most face frame overlay doors possess an overlay in the quarter of an inch to as much as three-quarters of the inch. Rarely, you may have overlays outside this choice, but they do occur and are often for only a few doors on an old cabinet. An overlay of six-pack inch is probably the most common, and also the one we will use for our examples.
For single openings, that is an opening on your cabinets that will have one door covering the whole opening, take the width and height of the opening and then add one inch to the width and height and that will give you a half inch overlay on all four sides. As an example, if the rough opening is sixteen inches broad and half dozen inches tall, you will require a door 5 inches broad and one-hundred inches tall.