European Cabinet Door Hinge Template - Step-by-step instructions for measuring your face frame cabinets for new cupboard doors. Most cupboard companies would like you to give them the actual door dimensions rather than the rough openings. Rough openings are the actual measurements of these rectangular holes on your cabinets that you would like to pay with cupboard doors. You'll need to take these dimensions and convert them into doorway dimensions before you order. Assess your cupboard openings to find out whether they're square.
If they aren't, then you may wish to measure the diameter at the top and bottom and then take the bigger of the two. Same thing goes for the elevation, measure height on the left and side and take the bigger of the two. You now have the rough opening dimensions. So to make it easier to match your new doorways to your existing openings, you might want to make a sketch of your cabinets and number them on paper. This is going to make mounting the new doors much easier, especially if you have several doors which are near the identical size. Now that you have the rough opening dimensions, what can you do with them?
You finally have to make a determination. How many overlays do you wish to have in your face frame cabinets? Bear in mind how wide are the stiles between openings? Stiles is the perpendicular strips covering the edges of the cabinet box. If two doorways are side by side and hinge to hinge, they will both need clearance to swing open without hitting another doorway, even if that door is open as well. The quantity of clearance is mostly a function of which hinge you're using. Check with your hinge maker to find out how much you want. Most hinges will require anywhere from zero clearance up to a quarter of a inch.
Check the bottom for any decorative moldings that might hit the bottom of your doors and fix accordingly. Most face frame overlay doors have an overlay in the quarter of an inch to as much as three-quarters of an inch. Rarely, you might have overlays outside this range, however they do happen and are often for just a couple of doors on a classic cupboard. An overlay of one-half inch is probably the most common, and the one we'll use for our examples.
For unmarried openings, that is a opening on your cabinets which will have a door covering the whole opening, choose the height and width of the opening and then add 1 inch to the height and width and that is going to give you a half inch overlay on all four sides. As an example, if the rough opening is sixteen inches wide and half dozen inches tall, you will require a door seventeen inches wide and thirty-three inches tall.